The NEW redesigned Merlin IV blocks from World Products incorporates numerous improvements new features. New Features Include: Thicker main webs for increased strength Thicker cylinder walls for increased ring seal & longevity Increased Volume priority main oiling system Front oil feed for dry sump systems Front oil cross over and restrictor provisions Will accept cam journals up to 60mm babbit...
Overstock Sale! $2.50 ea. Autolite and Champion Race Plugs. Autolite AR 471X6 AR 471X7 AR 472 AR 92 Champion S-53C S-55C Call Rich @ 704-425-0526 Or Email [email protected]. Davidson, NC 28036 (704) 425-0526
31 Spline 4 pinion open differentials used..... $100 Billet Yoke (1350) w/ pulley, used..... $75 NASCAR Quality 9in. Ring and Pinion Sets: 3.18 Used Richmond, REM, Pocket Milled (9310).......$125 3.22 Used Visteon, REM ..$125 3.91 New Ford Racing, REM..... $400 4.11 New Richmond, REM $150 4.78 New Motive AX, L/W, REM..... $350 5.43 New Motive, REM..... $300 5.43 New Motive AX, L/W, REM..... $35...
Never used Repop right and left outside front door handles and and push buttons for 1952-56 Fords from MACS...came with a project car and I do not need them..they will cost you $180 with tax shipping etc from MACS..I m asking $100 shipped in the US
includes polished pulleys, carburator, fuel pump. no distributor, or flywheel. text to the phone number listed the word "motor". dont call before you text since I wont answer , assuming its a telemarketer or someone offering to help sell stuff. text me, thanks. mooresville, NC 28115 (704) 495-0439
here is a brand new flat bottom box pan for a standard rail SBC. It has all the Olson tricks and had never been bolted onto anything. Comes with an Olson pickup and modified pump along with the drive shaft. Dimensions are 7 deep, 10.5 wide at the bottom and 12inch across the top rails. This was $850 bucks with the pickup.. Cleveland, NC 27013 (704) 278-3222 (704) 928-5071
Here is a dang good looking and working Muncie. It was in a ASA car years ago so the bottom of the case has been plated. It has a Hurst Super shifter III with boot on it.Handle is wrong but I'll include it anyway. It is a 68-9 case with later style 26 spline M20 gears and a small( turbo 350 style) output shaft.. Cleveland, NC 27013 (704) 278-3222 (704) 928-5071
Here is a good 4 inch stroke BBC crank(.010 mains,Std Rods)with a set of Oliver 6.385" long rods 2.2 journal .990 pin. These parts were taken out of a good running engine I re-did as a long rod 496. 2 of the rods were worked on some time or another( resize honed) but were in a running engine and bearings were perfect. New cost was $3500 for these parts.. Cleveland, NC 27013 (704) 278-3222 (704)...
here is a setup I took out of a 468 I redid as a bigger engine. Crank is 4 inch stroke and .010 mains ,std. rods) could use polishing for it has been sitting for a while. 2 of the rods have been resized at some time but had perfect bearings in them when dis-assembled. I will separate the crank and rods...$750 each .. Cleveland, NC 27013 (704) 278-3222 (704) 928-5071
only 500 miles on this engine. 030 forged flattop pistons, Childs and Albert steel rods, E303 Hyd. Roller cam. Edebrock E series alum. heads,MSD dist, Roller rockers,HV pump and shaft, roller cam chain, degreed balancer and sfi flexplate. More. runs excellent.. you pay paypal fee.. Cleveland, NC 27013 (704) 278-3222 (704) 928-5071
Here is a good 4 inch stroke BBC crank(.010 mains,Std Rods)with a set of Oliver 6.385" long rods 2.2 journal .990 pin. These parts were taken out of a good running engine I re-did as a long rod 496. 2 of the rods were worked on some time or another( resize honed) but were in a running engine and bearings were perfect. New cost was $3500 for these parts.. Cleveland, NC 27013 (704) 278-3222 (704)...
$400

4 tires

Good year wrangler sr-a 265-60-20 less then 300 miles on tires porch pickup only sell at Walmart for 183.00 each
Engine case in excellent condition. Bored for 2.7 or 2.8 pistons and cylinders. Call John at 704-351-3304 _________________ John Forbes '70 914/6 historic race car '70 914/6 black IMSA-look '71 914/4 (red hot rod) '74 914 LE bumblebee (under restoration)
SRI is proud that we may now offer REAL, full-on NASCAR FR9 engines to the public! These engines are Re-Freshed Open Cup engines, and the spec is Road Race / Short Track, so they would make a great Engines for Road Racing / Vintage / Drag Racing / & Special Project Builds. (See dyno/spec sheet in pictures) -These Engines come with full front and rear dress -Bell Hsg Bolt Pattern is same as Chev...
I believe this to be a 49 mercury flat head motor, Has 24 head bolt pattern, motor turns over freely. I bought a hot rod project with this motor. any questions please call bill 732 674 1047. Motor is in troutman n.c.
These are my leftover mechanically fuel-injected parts. All them are very rare and no longer available. There are 5 side pieces of left-side sheet metal with the engine warm-up hose built in (factory), One piece new was worth over $400 when they were available. So those pieces alone are worth $2000. Most of the other items are the same way- not available and worth a good bit because they are so...
Clearing up confusion: We have both 4 cylinder 40 mm Weber Carburetors and 6 cylinder 40 MM Weber Carburetors. The 4 cylinder Webers are $300. The 6 cylinder, 40 mm Weber carburetors, cleaned and rebuilt are $3000. John will clean and rebuild them. Call John if you are interested in either. 704-351-3304 _________________ John Forbes '70 914/6 historic race car '70 914/6 black IMSA-look '71 914/...
here is a new case for sale. Has a machining error at the pinion o-ring seal.(pictured..Oring sits inside it and seals ok) This case is $800 from MW.. Cleveland, NC 27013 (704) 278-3222 (704) 928-5071
Here is a brand new Winters shifter for a GM 4L60,700R4 or 4L80 Automatic trans. This was 400 bucks.. Cleveland, NC 27013 (704) 278-3222 (704) 928-5071
Here is a new spread-rail small block pan. was 700 bucks from Stephs. Brand New!. Cleveland, NC 27013 (704) 278-3222 (704) 928-5071